MSL Mini Step Lite
|N||Incandescent 7Watt Lamp||BLANK||120VAC|
|L||LED – White||AC12||12VAC|
|A||LED – Amber||DC12||12VDC|
codes and standards
• UL approved for damp locations.
• One piece design to install in standard single gang switch box.
• Standard unit is white with a universal louver type faceplate.
• The vertical louver face plate comes attached to the electronics. If the horizontal louver face plate is needed just remove the vertical plate and install the horizontal face plate.
• Open faceplate is available, in vertical mount only. It is available as an accessory (available in sets of 6).
• Other finishes available: Ivory or brushed aluminum (see accessory faceplates), these must be ordered in addition to the standard unit.
• The accessory faceplate are only available in sets of 6.
• Units designed to be installed in a standard single
gang switch box.
• 120 VAC voltage input
• 12VAC and 12VDC input also available.
• Power Consumption: Unit consumes less than 1 Watt per unit.
• Choice of Incandescent 7 Watt lamp or LED lamps.
• LED’s are available in white or amber.
• Total of 12 LED’s.
• 6V Maintenance free sealed nickel cadmium battery.
• Operating temperature range is 20ºF (-7ºC) to 95ºF (35ºC).
• Provides a minimum of 90 minutes emergency illumination.
• Low profile remote unit is available with two 5.4 watt wedge-base tungsten lamps and choice of black, white or bronze.
• Five year warranty on units. (Lamps not included.)