Image Image Image Image Image Image Image Image Image Image

EDIFY | June 27, 2017

Scroll to top

Top

6 3/4” Uniframe CFL

Uniframe Frame-In Kit

Catalogue No.

Description

1001F13U

13w Quad/Triple
GX24q-1 Base
120v – 0.13amp max
277v – 0.06amp max

1001F18U

18w Triple
GX24q-2 Base
120v – 0.17amp max
277v – 0.08amp max

1001F26U

26w Triple
GX24q-3 Base
120v – 0.24amp max
277v – 0.11amp max

1101F18U
1101F18ICU
1101FR18U

18w Quad/Triple
GX24q-2 Base
120v – 0.17amp max
277v – 0.08amp max

1101F2642U
1101F2642ICU
1101FR2642U

26w Quad/Triple
GX24q-3 Base
120v – 0.24amp max
277v – 0.11amp max

32w Triple
GX24q-3 Base
120v – 0.31amp max
277v – 0.13amp max

42w Triple
GX24q-4 Base
120v – 0.38amp max
277v – 0.17amp max

1001F Features

1. Mounting Frame: .036" (#20ga.) Galvanized Steel. Accommodates all ceilings up to 1 1/2” thick; including existing or inaccessible areas.

2. Trim Clips: “Push In / Twist Out” Stainless Steel clips hold reflector flush to ceiling.

3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel. UL Listed for maximum of 8 (#12ga.) through branch circuit conductors.

4. UniFrame™ Mounting System – Grid Ceiling: Tool free mounting in grid ceilings. .036" (20ga.) Galvanized Steel interlocking slide bars adjust to 24-1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed clamps for positive attachment to grid ceiling systems.

5. UniFrame™ Mounting System – Wood Joist Ceiling: Integral nailing tabs, alignment guides, fastener holes and bendable strapping guides for wood joist installation. Galvanized Steel interlocking slide bars adjust from 12-15/16" to 24-1/8" long to accommodate 16" and 24" O.C. joist spacing, with or without strapping.

6. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life protection, class “P” thermally protected, class “A” sound rating.

7. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast.

8. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to reflector trim by spring clip for precise optic alignment.

 

1101F Features:

 1. Mounting Frame: .036" (#20ga.) Galvanized Steel. Accommodates all ceil­ings up to 1-1/2" thick; including existing or inaccessible areas.

2. Trim Clips: “Push In / Twist Out” Stainless Steel clips hold reflector flush to ceiling.

3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel. UL Listed for maximum of 8 (#12ga.) through branch circuit conductors.

4. Uniframe™ Mounting System – Grid Ceiling: Tool free mounting in grid ceilings. .036" (20ga.) Galvanized Steel interlocking slide bars adjust to 24- 1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed clamps for positive attachment to grid ceiling systems.

5. Uniframe™ Mounting System – Wood Joist Ceiling: Integral nailing tabs, alignment guides, fastener holes and bendable strapping guides for wood joist installation. Galvanized Steel interlocking slide bars adjust from 12-15/16" to 24-1/8" long to accommodate 16" and 24" O.C. joist spacing, with or without strapping. Suitable for Steel Ceiling construction using standard 1/2" EMT, (See Instruction Sheet).

6. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life protec­tion, class “P” thermally protected, class “A” sound rating. Minimum starting temperature is 0˚F.

7. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast.

8. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to reflec­tor trim by spring clip for precise optic alignment.

 

1101FIC Features

1. Housing: .028" (#21ga.) aluminum. UL listed for direct contact with thermal insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at 1.57 PSF (or 75pa), which complies with Model Energy Code (Section 602.3.3) and Washington State Energy Code (Section 502.4) and reduces heat loss and condensation in ceiling. Access door for inspection of junction box.

2. Mounting Frame: .032 (#22 ga.) galvanized steel. Accommodates ceilings up to 1 1/2" thick. 3/8" deep integral lip. Locks into position along length of mounting bars with locking screw and bendable slot. Four slots are positioned 90° apart to simplify alignment. Push-in/twist-out roto-clips hold reflector flush to ceiling.

3. Junction Box: 2" X 4" X 3 1/2" (22 cu. in) .032" (#22 ga.) galvanized steel. UL listed for maximum of 8 (#12 ga.) 90°C through branch circuit conductors.

4. Mounting Bars: .059" (#16 ga.) galvanized steel. Bars pivot for easy attachment and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Bars can accommodate 12" O.C joist spacing after a slight field modification (see Instruction Sheet). Features integral self tapping phillips screws for secure attachment to wood or metal construction. Attaches to T-bar ceilings without the need of accessories.

5. Ballast: Mounted inside housing. 120V – 277V UL Listed Electronic Ballast, end of lamp life protection, class “P” thermally protected, class “A” sound rating.

6. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast.

7. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to reflector trim by spring clip for precise optic alignment.

 

1101FR Features

1. Uniframe™ Mounting Ring: .032" (#22ga.) thick Galvanized Steel. Accommodates existing ceilings up to 2" thick. Attaches securely to any type of ceiling material without tools using (3) mounting straps provided. Includes adhesive backed aperture template.

2. Trim Clips: “Push In / Twist Out” clips hold reflector flush to ceiling.

3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel. UL Listed for 90˚ C supply wire. Attaches to mounting ring without tools.

4. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life protection, class “P” thermally protected, class “A” sound rating.

5. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18 AWM leads to ballast.

6. Socket Housing: .036" (#20ga.) Galvanized Steel housing attaches to reflector trim by spring clip for precise optic alignment.